-
Hose Assembly Failure Checklist: 6 Common Causes From Crimping To Fittings
Most premature hose assembly failures come from crimp size, bend radius, fitting type or installation twist rather than the hose itself. Six checks before you change the hose spec.
-
MT98 Mining Spiral Hose: Selection and Safety Points for Underground Use
MT98 mining steel wire spiral hose is used for underground hydraulic supports. Selection must cover pressure rating, flame-retardant and anti-static requirements and fitting type.
-
Where UPE Wear-Resistant Hose Is Used: How It Differs From Standard Abrasion Hose
UPE hose uses a UHMW-PE liner to extend service life in mortar, slurry, powder and abrasive media transfer. Applications and selection limits explained.
-
Hydraulic Hose Standard Cross-Reference: EN, SAE and GB Equivalents
EN, SAE and GB standards are often mixed in one enquiry. Common equivalents and the checks needed before substituting one for another.
-
The Cost of the Wrong Liner: Fluid Compatibility, the More Hidden Failure Source Than Pressure Rating
Hydraulic hoses meeting pressure specifications do not guarantee qualified chemical compatibility. The inner tube is in direct contact with hydraulic media. Material incompatibility with oil may cause···
-
CRIMPING PROCESS: FROM HAND FEEL TO CLOSED-LOOP CONTROL
Closed-loop crimping machines deliver high precision up to ±0.02 mm. Adopt first-piece validation, sampling inspection and last-piece recheck, combined with geometric tolerance inspection, proof pres···
-
CAN AN OLD HOSE RETURN TO THE INDUSTRIAL CHAIN
High-pressure hydraulic hoses are typical hard-to-recycle composite materials composed of rubber, steel reinforcement layers and crimped metal fittings. This article introduces drawbacks of traditiona···
-
Digital Twins Move Into Hose Engineering: From Physical Trial-and-Error to Virtual Validation
Traditional development of high-pressure hydraulic hoses relies heavily on physical impulse tests with long cycles and high costs, making customized optimization for specific working conditions diffic···
-
Machine Vision on the Line: How AI Inspection Is Rewriting Quality Control for High-Pressure Hose
Traditional manual visual inspection for high-pressure hoses suffers from fatigue-related missed detections, subjective judgment and poor data traceability. The machine vision + deep learning online i···
-
High-Pressure Hose in 2026: Higher Pressure Ratings, Faster Import Substitution, Smarter Monitoring
High-pressure hoses are key components of hydraulic systems, withstanding pressure pulses, temperature alternation, medium corrosion and mechanical wear. The industry is currently undergoing three maj···
No articles found in this category