-
Large-Diameter Spiral Hose DN51-DN127: Applications and Installation Notes
Large-diameter spiral hose is used for main and return lines of metallurgy, marine, shield and large construction equipment. Watch bend radius, support spacing and torsion.
-
Export Service Update: Stock Shipment and Small Mixed-Size Trial Orders
For overseas distributors and local assembly workshops: common sizes in stock, small mixed-size trial orders accepted, quotation within 2 hours, shipment within 3 days after sample approval.
-
Hose Assembly Failure Checklist: 6 Common Causes From Crimping To Fittings
Most premature hose assembly failures come from crimp size, bend radius, fitting type or installation twist rather than the hose itself. Six checks before you change the hose spec.
-
MT98 Mining Spiral Hose: Selection and Safety Points for Underground Use
MT98 mining steel wire spiral hose is used for underground hydraulic supports. Selection must cover pressure rating, flame-retardant and anti-static requirements and fitting type.
-
Where UPE Wear-Resistant Hose Is Used: How It Differs From Standard Abrasion Hose
UPE hose uses a UHMW-PE liner to extend service life in mortar, slurry, powder and abrasive media transfer. Applications and selection limits explained.
-
Hydraulic Hose Standard Cross-Reference: EN, SAE and GB Equivalents
EN, SAE and GB standards are often mixed in one enquiry. Common equivalents and the checks needed before substituting one for another.
No articles found in this category